Search results for "Particle size"

showing 10 items of 631 documents

Properties of Nanosized Ferrite Powders and Sintered Materials Prepared by the Co-Precipitation Technology, Combined with the Spray-Drying Method

2016

Cobalt and nickel ferrites powders are synthesized by the co-precipitation technology, combined with the spray-drying method. The crystallite size, specific surface area (SSA), magnetic properties of synthesized products are investigated. All the synthesized ferrites are nanocrystalline single phase materials with crystallite size of 5-6 nm, the SSA of 80-85 m2/g and the calculated particle size of 13-15 nm. After spray-drying granules of the size up to 10 μm are obtained. After thermal treatment at 550 and 950 °C SSA decreases to 40-50 m2/g and 20-22 m2/g, respectively. The saturation magnetization at these temperatures increase from 17 to 40 emu/g for NiFe2O4 and from 51 to 77 emu/g for C…

010302 applied physicsMaterials scienceMechanical EngineeringMetallurgySintering02 engineering and technologyThermal treatment021001 nanoscience & nanotechnology01 natural sciencesNanocrystalline materialChemical engineeringMechanics of MaterialsSpray dryingSpecific surface area0103 physical sciencesFerrite (magnet)General Materials ScienceParticle sizeCrystallite0210 nano-technologyKey Engineering Materials
researchProduct

Wear and corrosion resistant performance of thermal-sprayed Fe-based amorphous coatings: A review

2019

Abstract Thermal sprayed Fe-based amorphous coatings exhibit excellent wear and corrosion resistance, and thus have been widely utilized for enhancing the performance of material surfaces. In this paper, important research progresses achieved in regards to deposition technologies and properties of thermal sprayed Fe-based amorphous coatings are reviewed. In particular, the dependence of wear and corrosion resistance of the coatings on processing parameters, e.g., kinetic energy, particle size, gas flow rate, and heat treatment temperature are summarized. Moreover, the utilization of reinforced phases and alloy elements for enhancing the wear and corrosion resistance of the coatings are pres…

010302 applied physicsMaterials scienceMetallurgyAlloy02 engineering and technologySurfaces and InterfacesGeneral Chemistryengineering.material021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesSurfaces Coatings and FilmsVolumetric flow rateCorrosionAmorphous solid0103 physical sciencesThermalMaterials ChemistryengineeringDeposition (phase transition)Fe basedParticle size0210 nano-technologySurface and Coatings Technology
researchProduct

Surface sediment dynamics along the shore of Hammamet Gulf (Tunisia, southern Mediterranean)

2016

International audience; In the summer of 2015 the authors analysed grain size and surface sediment composition through high spatial resolution from samples taken at 53 stations along the Hammamet coast (southern Mediterranean Sea). The Acoustic Doppler Current Profiler deployed in this study showed that the surface current flows toward the north-east, parallel to the coast at a maximum speed along the main axis of about 5.9 cm s−1. Near the bottom the current flows toward the north-west at a maximum speed of 2.2 cm s−1. The tide plays a relatively small role in water circulation in Hammamet Gulf. Spatial distribution of particle size, along with speed and current direction analysis, furnish…

010504 meteorology & atmospheric sciences010501 environmental sciencesSpatial distribution01 natural sciences[ SDE ] Environmental SciencesMediterranean seaAcoustic Doppler current profilerCurrents14. Life underwaterGeomorphology0105 earth and related environmental sciencesEarth-Surface ProcessesShoregeographyMineralsgeography.geographical_feature_categorySedimentGeologyParticle sizeSediment dynamicsHammamet GulfSwellCurrent (stream)Oceanography13. Climate action[SDE]Environmental SciencesSubmarine pipelineGeology
researchProduct

The Influence of Crystal Size Distributions on the Rheology of Magmas: New Insights From Analog Experiments

2017

This study examines the influence of particle size distributions on the rheology of particle suspensions by using analogue experiments with spherical glass beads in silicone oil as magma equivalent. The analyses of 274 individual particle-bearing suspensions of varying modality (uni-, bi- tri- and tetramodality), as well as of polymodal suspensions with specific defined skewness and variance, are the first data set of its kind and provide important insights in the relationship between the solid particles of a suspension and its rheological behaviour. Since the relationship between the rheology of particle bearing suspensions and its maximum packing fraction ϕm is well established by several…

010504 meteorology & atmospheric sciencesDispersityMineralogyThermodynamics010502 geochemistry & geophysicsAtomic packing factor01 natural sciencesViscosityGeophysicsRheologyGeochemistry and PetrologyParticle-size distributionParticleParticle sizeSuspension (vehicle)Geology0105 earth and related environmental sciencesGeochemistry, Geophysics, Geosystems
researchProduct

On the Dependence of Cirrus Parametrizations on the Cloud Origin

2019

<p>Particle size distributions (PSDs) for cirrus clouds are important for both climate models as well as many remote sensing retrieval methods. Therefore, PSD parametrizations are required. This study presents parametrizations of Arctic cirrus PSDs. The dataset used for this purpose originates from balloon-borne measurements carried out during winter above Kiruna (Sweden), i.e. north of the Arctic circle. The observations are sorted into two types of cirrus cloud origin, either in-situ or liquid. The cloud origin describes the formation pathway of the ice particles. At temperatures below −38 °C, ice particles form in-situ from solution or ice nuclea…

010504 meteorology & atmospheric sciencesMeteorologyMeteorologi och atmosfärforskningAerospace EngineeringCloud computing010502 geochemistry & geophysics01 natural sciencescirrus cloudsddc:550Parametrization (atmospheric modeling)Astrophysics::Galaxy AstrophysicsPhysics::Atmospheric and Oceanic Physics0105 earth and related environmental sciencesbusiness.industryAstrophysics::Instrumentation and Methods for AstrophysicsparametrizationData setRymd- och flygteknikGeophysicsArcticice particle size distribution (PSD)Meteorology and Atmospheric SciencesPhysics::Space PhysicsGeneral Earth and Planetary SciencesEnvironmental scienceCirrusbusinessArctic cloud origin
researchProduct

Characterization of a Newly Developed Aircraft-Based Laser Ablation Aerosol Mass Spectrometer (ALABAMA) and First Field Deployment in Urban Pollution…

2011

We present here the development and first field deployment of a novel Aircraft-based Laser ABlation Aerosol MAss spectrometer (ALABAMA), which is capable of measuring the chemical composition and size of individual ambient aerosol particles in the size range between 150 and 900 nm. The instrument uses a continuous wave 532 nm laser to size and detect the particles, a pulsed 266 nm laser to ablate and ionize the particles, and a bipolar, Z-shaped time-of-flight mass spectrometer to detect positive and negative ions. The ALABAMA fits into a 19"-aircraft rack of 150 cm height and has a total weight of 140 kg, thus currently being one of the smallest and lightest-weight instruments of its type.…

010504 meteorology & atmospheric sciencesinstrument developmentaerosolMineralogy01 natural scienceslaw.inventionOpticslawparticle composition11. SustainabilityEnvironmental ChemistryGeneral Materials ScienceParticle beam0105 earth and related environmental sciencesRange (particle radiation)Laser ablationbusiness.industryChemistry010401 analytical chemistryAtmosphärische SpurenstoffeLaserPollution0104 chemical sciencesAerosol13. Climate actionMass spectrumParticleParticle sizeAerosol Mass spectrometerbusinessAerosol Science and Technology
researchProduct

Shape, size, and quantity of ingested external abrasives influence dental microwear texture formation in guinea pigs

2020

Food processing wears down teeth, thus affecting tooth functionality and evolutionary success. Other than intrinsic silica phytoliths, extrinsic mineral dust/grit adhering to plants causes tooth wear in mammalian herbivores. Dental microwear texture analysis (DMTA) is widely applied to infer diet from microscopic dental wear traces. The relationship between external abrasives and dental microwear texture (DMT) formation remains elusive. Feeding experiments with sheep have shown negligible effects of dust-laden grass and browse, suggesting that intrinsic properties of plants are more important. Here, we explore the effect of clay- to sand-sized mineral abrasives (quartz, volcanic ash, loess,…

0106 biological sciences10253 Department of Small AnimalsGuinea PigsDental WearMineral dustdiet reconstruction010603 evolutionary biology01 natural sciencesTexture (geology)Texture formation010104 statistics & probabilitychemistry.chemical_compoundstomatognathic systemAnimalsHerbivoryParticle Size0101 mathematicsQuartzgrit2. Zero hunger1000 MultidisciplinaryMultidisciplinary630 AgricultureMetallurgyPlantsBiological SciencesAnimal FeedSilicateDietTooth AbrasionchemistryTooth weartooth wear570 Life sciences; biologyParticle sizedustfeeding experimentProceedings of the National Academy of Sciences
researchProduct

Granulation and microbial community dynamics in the chitosan-supplemented anaerobic treatment of wastewater polluted with organic solvents.

2018

Abstract The effect of chitosan on the development of granular sludge in upflow anaerobic sludge blanket reactors (UASB) when treating wastewater polluted with the organic solvents ethanol, ethyl acetate, and 1-ethoxy-2-propanol was evaluated. Three UASB reactors were operated for 219 days at ambient temperature with an organic loading rate (OLR) of between 0.3 kg COD m −3 d −1 and 20 kg COD m −3 d −1 . One reactor was operated without the addition of chitosan, while the other two were operated with the addition of chitosan doses of 2.4 mg gVSS −1 two times. The three reactors were all able to treat the OLR tested with COD removal efficiencies greater than 90%. However, the time required to…

0106 biological sciencesAigua ContaminacióEnvironmental EngineeringPolymersEthyl acetate010501 environmental sciencesWastewater01 natural sciencesWaste Disposal FluidMethanosaetaMethanomicrobialesChitosanchemistry.chemical_compoundGranulationExtracellular polymeric substanceBioreactors010608 biotechnologyAnaerobiosisParticle SizeWaste Management and Disposal0105 earth and related environmental sciencesWater Science and TechnologyCivil and Structural EngineeringBiological Oxygen Demand AnalysisChitosanbiologySewageEcological ModelingMicrobiotaGranule (cell biology)biology.organism_classificationPulp and paper industryPollutionMethanogenchemistryWastewaterSolventsAigua MicrobiologiaGeobacterWater Pollutants ChemicalWater research
researchProduct

Assessment of surface sediment dynamics and response of benthic macrofauna assemblages in Boughrara Lagoon (SW Mediterranean Sea)

2016

International audience; A study was conducted in the spring of 2009, the winters of 2010 and 2013, and in the summer of 2012 at 13 stations in Boughrara Lagoon, Tunisia (southern Mediterranean). The country’s largest lagoon, it is considered to be an anthropogenically stressed area, though a major tourist centre—Djerba Island—is located along its northern shores. The lagoon bottoms were studied via analyses of grain size, surface sediment composition, total organic matter (TOM) and through the trophic and functional organisation of benthic macrofauna. The results indicate that the bottoms are composed of fine, medium or coarse sands and that sediment distribution is controlled by water move…

0106 biological sciencesMediterranean climateGeneral Decision SciencesBenthic macrofauna010501 environmental sciences01 natural sciences[ SDE ] Environmental SciencesMediterranean seaEcosystem14. Life underwaterEcology Evolution Behavior and Systematics0105 earth and related environmental sciencesTrophic levelEcologyEcology010604 marine biology & hydrobiologyDetritivoreSedimentTotal organic matterParticle sizeSediment dynamicsTrophic structureBioindicationHabitat13. Climate actionBenthic zone[SDE]Environmental SciencesEnvironmental science
researchProduct

Carbohydrate dynamics in particle-size fractions of sandy spodosols following forest conversion to maize cropping

2006

International audience; In southwest France, much of the forested land on sandy spodosols has been converted to continuous maize cropping in the last few decades. To evaluate the impacts of this change on soil organic matter properties, we compared total organic C and neutral and amino sugars content in whole soil and particle size separates of two forested, and five related sites that had been either clear-cut for 12 and 18 mo, or cultivated to maize for 4-22yr. Soil carbohydrates accounted for 4-7% of the total organic C across all sites. Soil organic C contents of clear-cut and cultivated sites were only 57-79% of the average value measured in forested sites. Accordingly, carbohydrate co…

0106 biological sciencesPINE FORESTAmino sugarChronosequenceSoil ScienceMuramic acidSilt[SDV.SA.SDS]Life Sciences [q-bio]/Agricultural sciences/Soil study01 natural sciencesMicrobiologyPARTICLE SIZE SEPARATESUCRESchemistry.chemical_compoundPoaceaeFRACTIONNEMENT GRANULOMETRIQUE2. Zero hungerchemistry.chemical_classificationPODZOSOLBIOCHIMIESoil organic matterCARBOHYDRATESPIN MARITIME04 agricultural and veterinary sciences15. Life on landPodzolchemistryAgronomyMAIZE CROPPINGSoil water040103 agronomy & agriculture0401 agriculture forestry and fisheries010606 plant biology & botany
researchProduct